• " や /* が行に単独に現れた場合、良くない
• test_int のような語でも int の部分が着色されてしまう
• 色は実は目茶苦茶

何を編集するかって ? gcc/src/gcc/config/CPU/CPU.md 等です。

これを使った後には cc-mode の方の色も変ってしまうので、このままでは困る。

hatano   ○
uebayasi ○
dogcow   ○
msaitoh  ○
t-mochi  ○
tokuda   ○
kiyohara ○
ki-nu    ○
take     ○

jun      ○
nonaka   ○
thir     ○
fukaumi  ○

何とか素直な構成にして見よう :-)

＠ ap2-auth-pg も試しているが:

• bytebench を動かす
• その表示を譜に保存
• perl bytebench-plot-polar file1 file2 file3 と起動
• bytebench.png に結果が保存される

Open Firmware, 2.0f1
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
For Open Firmware serial I/O type:
TTYA IO<return>
 ok
0 > boot ide1/disk@0:0
  DEFAULT CATCH!, code=FFF00700 at   %SRR0: 00600000   %SRR1: 00083070 
 ok

以前の自分の日記 に書いてあった。いきなり boot するのではなく、一度変数に設定してから boot とやる。

0 > setenv boot-device ide1/disk@0:0  ok
0 > setenv boot-file netbsd.macppc  ok
0 > boot 

途中 竹村梨園 にて二種類の梨を調達(家族用)。 幸水と、もう一つ、名前を失念してしまったが、これが信じられないくらい甘い。 電話で聞いたら、 なつひかり だそうだ。こればかりは (聞く前には) google では見つけられなかった。

sudo make clean && time sudo make package
...
===> Building binary package for openoffice2-2.2.1
Creating package /export/pkgsrc/packages/All/openoffice2-2.2.1
Using SrcDir value of /usr/pkg
Registering conflicts: staroffice-[0-9]* openoffice-[0-9]* openoffice-bin-[0-9]* 
	openoffice2-bin-[0-9]* openoffice-linux-[0-9]*.
33036.738u 3685.397s 10:24:09.95 98.0% 0+0k 33167+1371292io 4788pf+96w

sudo make clean && time sudo make package

 46  struct object
 47  {
 48    void *pc_begin;
 49    void *tbase;
 50    void *dbase;
 51    union {
 52      const struct dwarf_fde *single;
 53      struct dwarf_fde **array;
 54      struct fde_vector *sort;
 55    } u;
 56  
 57    union {
 58      struct {
 59        unsigned long sorted : 1;
 60        unsigned long from_array : 1;
 61        unsigned long mixed_encoding : 1;
 62        unsigned long encoding : 8;
 63        /* ??? Wish there was an easy way to detect a 64-bit host here;
 64           we've got 32 bits left to play with...  */
 65        unsigned long count : 21;
 66      } b;
 67      size_t i;
 68    } s;
 69  
 70  #ifdef DWARF2_OBJECT_END_PTR_EXTENSION
 71    char *fde_end;
 72  #endif
 73  
 74    struct object *next;
 75  };

• 65 行目の 21 を 16 にすると、上の誤りは表示されません (でもそうすると、後で Segfault します)。
• 65 行目の unsigned long を unsigned long long としても上と同じ
• its type って言っているけれど、「その型」とは、どういう型 ?
• この部分は、gcc 4.1.1 4.2.1 のどちらでも同じ、実績のある記述です (unwind-dw2-fde.h 等、何も変更していません)
• 当然別のどこかを変にいじっているから問題な訳だけれど、どうやって ここに影響する ?
• unsigned long の型を変更している ?
• unsigned long が 16 bit で unsigned int が 8 bit (?)

    60  #include "auto-host.h"
    61  #undef gid_t
    62  #undef pid_t
    63  #undef rlim_t
    64  #undef ssize_t
    65  #undef uid_t
    66  #undef vfork
    67  #include "tconfig.h"
    68  #include "tsystem.h"
    69  #include "coretypes.h"
    70  #include "tm.h"
    71  #include "unwind-dw2-fde.h"

XAW_TYPE=	3d
PKG_OPTIONS.emacs_current=	xaw

pkgsrc って、「何々をするには、どこどこで make すれば良い」 さえ分っていれば、後は何も考えなくて良いので本当に便利。

X11_TYP=xorg
X11_TYPE=modular

x11/modular-xorg-server
meta-pkgs/modular-xorg-apps/
meta-pkgs/modular-xorg-drivers/
meta-pkgs/modular-xorg-fonts/

meta-pkgs/modular-xorg-libs/

(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(WW) Warning, couldn't open module fbdevhw
(II) UnloadModule: "fbdevhw"
(EE) R128: Failed to load module "fbdevhw" (module does not exist, 0)
(II) UnloadModule: "ati"

/usr/pkg/lib/xorg/modules/linux/libfbdevhw.la
/usr/pkg/lib/xorg/modules/linux/libfbdevhw.a
/usr/pkg/lib/xorg/modules/linux/libfbdevhw.so

(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/pkg/lib/xorg/modules//libfbdevhw.so
(EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object.
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/pkg/lib/xorg/modules//libfbdevhw.so
(EE) R128: Failed to load module "fbdevhw" (invalid module, 0)

sudo xorgcfg 

Fatal server error:
xf86MapVidMem: could not mmap screen [s=20000,a=a0000] (Invalid argument)

cannot open /dev/wsmouse

ttyp2:makoto@u2 9:36:10/070821(~)> \
? grep EE ~/public_html/diary/attach/2007/20070821-0930
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) Unable to locate/open config file
(II) Loading extension MIT-SCREEN-SAVER
(EE) Failed to load module "glx" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) R128: Failed to load module "fbdevhw" (module does not exist, 0)
(EE) Screen(s) found, but none have a usable configuration.

(EE) R128: Failed to load module "fbdevhw" (module does not exist, 0)
(EE) Screen(s) found, but none have a usable configuration.

-        #Option     "UseFBDev"                 # [<bool>]
+        Option     "UseFBDev"                  "False"

--- pkgsrc/x11/xf86-video-ati/work/xf86-video-ati-6.6.3/src/r128_driver.c.orig  2006-10-03 23:53:03.000000000 +0900
+++ pkgsrc/x11/xf86-video-ati/work/xf86-video-ati-6.6.3/src/r128_driver.c       2007-08-21 11:06:43.000000000 +0900
@@ -2198,11 +2198,11 @@
        if (!R128PreInitInt10(pScrn, &pInt10)) goto fail;
 
     if (!R128PreInitConfig(pScrn))             goto fail;
-
+#if !defined(__powerpc__)
     if (!R128GetBIOSParameters(pScrn, pInt10)) goto fail;
-
+#endif
     if (!R128GetPLLParameters(pScrn))          goto fail;
-
+while(1) {};
     /* Don't fail on this one */
     R128PreInitDDC(pScrn, pInt10);
 
ttyp0:makoto@u2 14:48:58/070821(~)> 

    64  xf86Int10InfoPtr
    65  xf86ExtendedInitInt10(int entityIndex, int Flags)
    66  {

   252                                 "No legacy BIOS found -- trying PCI\n");

＠ OF 3 の機械では:

     Status: Command failed
    Command: /targetroot/usr/mdec/installboot 
	/targetroot/boot /targetroot/usr/mdec/bootxx /dev/wd0c 
     Hit enter to continue
--------------------------------------------------------------
installboot: No superblock found

dvi-draw.c:524: error: conflicting types for 'home'
dvi-draw.c:524: note: an argument type that has a default promotion can't match an empty parameter name list declaration
xdvi.h:1438: error: previous declaration of 'home' was here

   523  
   524  extern void home();  /* from events.c */
   525  extern int fallbacktfm; /* from tfmload.c */

  1438  extern void     home ARGS((wide_bool go_home));

$NetBSD$

--- texk/xdvik/dvi-draw.c.orig	2007-08-19 22:37:56.000000000 +0900
+++ texk/xdvik/dvi-draw.c	2007-08-19 22:38:20.000000000 +0900
@@ -521,7 +521,7 @@
 
 #endif /* T1LIB */
 
-extern void home();  /* from events.c */
+extern void home(wide_bool);  /* from events.c */
 extern int fallbacktfm; /* from tfmload.c */
 
 static struct frame frame0;	/* dummy head of list */

/usr/pkg/lib/perl5/vendor_perl/5.8.0/powerpc-netbsd-thread-multi/auto/Text/ChaSen/ChaSen.so: Undefined PLT symbol "chasen_getopt_argv" (symnum = 20)

> objdump -R /usr/pkg/lib/perl5/vendor_perl/5.8.0/powerpc-netbsd-thread-multi/auto/Text/ChaSen/ChaSen.so | \
grep chasen_getopt_argv
00012200 R_PPC_JMP_SLOT chasen_getopt_argv

                     INDEX VALUES            
TEST BASELINE     RESULT      INDEX

Dhrystone 2 using register variables        116700.0  5515824.6      472.6
Double-Precision Whetstone                      55.0     1480.5      269.2
Execl Throughput                                43.0      819.6      190.6
File Copy 1024 bufsize 2000 maxblocks         3960.0    81610.0      206.1
File Copy 256 bufsize 500 maxblocks           1655.0    83798.0      506.3
File Copy 4096 bufsize 8000 maxblocks         5800.0    67316.0      116.1
Pipe Throughput                              12440.0   957078.3      769.4
Pipe-based Context Switching                  4000.0   154965.1      387.4
Process Creation                               126.0     9938.1      788.7
Shell Scripts (8 concurrent)                     6.0      243.3      405.5
System Call Overhead                         15000.0   918972.2      612.6
                                                                 =========
     FINAL SCORE                                                     368.8

vga1 at pci1 dev 7 function 0: NVIDIA RIVA TNT2 Model 64 (rev. 0x15)

Network Boot 可能な AMD2 の板の一覧が欲しいなぁ。

＠ GENERIC.MP:

NetBSD catania 4.99.29 NetBSD 4.99.29 (GENERIC.MP) #0: 
Wed Aug22 04:45:59 PDT 2007
builds@wb42:/home/builds/ab/HEAD/i386/200708210002Z-obj/
  home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC.MP
i386

                     INDEX VALUES            
TEST BASELINE     RESULT      INDEX

Dhrystone 2 using register variables        116700.0  5496199.2      471.0
Double-Precision Whetstone                      55.0     1485.7      270.1
Execl Throughput                                43.0      749.6      174.3
File Copy 1024 bufsize 2000 maxblocks         3960.0    99399.0      251.0
File Copy 256 bufsize 500 maxblocks           1655.0    65350.0      394.9
File Copy 4096 bufsize 8000 maxblocks         5800.0    67386.0      116.2
Pipe Throughput                              12440.0   742087.8      596.5
Pipe-based Context Switching                  4000.0   112765.5      281.9
Process Creation                               126.0     7638.6      606.2
Shell Scripts (8 concurrent)                     6.0      298.3      497.2
System Call Overhead                         15000.0   766777.2      511.2
                                                                 =========
     FINAL SCORE                                                     338.2
1105.962u 1496.789s 52:47.54 82.1%      0+0k 29+366882io 291pf+0w
ttyp0:makoto@catania 16:55:52/070823(/tmp)> 

   RJ45                mini Din-8        
  +-----+ 1  CTS    -
  |     | 2         -
+-+     | 3  RXD    Green   3	緑
|       | 4  SG     Black   6	黒
|       | 5  SG	    Yellow  4	黄
+-+     | 6  TXD    Orange  5	橙
  |     | 7  DTR    -
  +-----+ 8  RTS    Brown   2	茶

黄 橙 茶 ()
5  6  8  2

4  3  7  1
黒 緑 () ()

               紫
              violet
     黒 black       blue 青
           6    7    8
                 yellow 黄 
緑 green 3      4     5 orange 橙
          >          <
             1     2 
        赤 red     brown 茶

  6:30 出発
       八街
       小提
       東金
       平和公園
       千葉寺
 11:30 帰着

fxp0 at pci0 dev 13 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 23
fxp0: Ethernet address 00:02:a5:41:df:b4
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acardide0 at pci0 dev 14 function 0
acardide0: Acard ATP860-A Ultra66 IDE Controller (rev. 0x01)
acardide0: bus-master DMA support present
acardide0: primary channel wired to native-PCI mode
acardide0: using irq 24 for native-PCI interrupt
atabus0 at acardide0 channel 0
acardide0: secondary channel wired to native-PCI mode

 DEFAULT CATCH!, code=FFF00700 

Western Digital おまえもか

ちなみに ここで書いている installboot は /usr/sbin/installboot では なく TsubaiBSD の /usr/mdec/installboot の場合の話。

old: Cyrus IMAP4 v2.0.17 
new: Cyrus IMAP4 v2.2.13 

• /var/imap, /var/spool/imap を sudo rsync -aH で写す
• 古い方を止める
• もう一度 rsync を使って同期
• 古い方を動かしておく
• format conversion

  file	old format	new
  mailbox.db	berkeley	skiplist
  *.seen	flat	skiplist

• 新しい方を動かす
• DNS を変更して新しい方を見るようにする

＠ spamassassin + spamass-milter:

INPUT_MAIL_FILTER(`spamassassin', `S=local:/var/run/spamass.sock,, F=, T=C:15m;S:4m;R:4m;E:10m')

spamd=YES
spamass_milter=YES

＠ sieve:

if      header :contains "X-Spam-Flag"  ["YES"]  { fileinto "inbox.spamassassin"; }
elsif   header :contains "X-Spam-Level" ["***"]  { fileinto "inbox.spamassassin3"; }

% sieveshell localhost
Please enter your password: ******
> put .sieve
> list
.sieve
> activate .sieve
> list
.sieve  <- active script
> quit

07 6,18 *  *   *  /usr/pkg/bin/sa-learn --spam /var/spool/imap/user/user_name/spam/
08 6,18 *  *   *  /usr/pkg/bin/sa-learn --ham  /var/spool/imap/user/user_name/ham/

Index: public_html/diary/lib/HNS/Diary.pm
===================================================================
RCS file: /cvsroot/h14m/hns-perl/public_html/diary/lib/HNS/Diary.pm,v
retrieving revision 1.35
diff -u -r1.35 Diary.pm
--- public_html/diary/lib/HNS/Diary.pm	5 Jan 2005 22:44:59 -0000	1.35
+++ public_html/diary/lib/HNS/Diary.pm	8 Aug 2007 11:14:21 -0000
@@ -80,8 +80,8 @@
 
 
 $Head = qq(<font size="+1">
-	   <a href="?%year%month%high&to=%year%month%{day}0#%year%month%{day}0"
-	   name="%year%month%{day}0">
+	   <a href="%year/%month/%{day}/#%year%month%{day}0"
+	   name="%year/%month/%{day}/">
 	   %year/%month/%day (%week) </a>%user{TENKI}</font><dl>\n);
 
 $UserVar = qq(<div class="uservar">

これで本当にうまく行っているかは良く調べていない。.htaccess にも一行追加した。

# yyyy/mm/ -> ?yyyymm
#-----------------------------
RewriteRule ([0-9][0-9][0-9][0-9])/([0-9][0-9])/ /~makoto/diary/index.cgi?$1$2 [NE,T=application/x-httpd-cgi,L]

PATH_INFO を使って

my @path = split('/', $ENV{'PATH_INFO'});

--- /home/makoto/public_html/diary/lib/HNS/Tools/RSS.pm.~1.7.~	2006-03-01 08:47:49.000000000 +0900
+++ /home/makoto/public_html/diary/lib/HNS/Tools/RSS.pm	2007-08-09 08:26:03.000000000 +0900
@@ -249,7 +249,7 @@
 		$content = $item{"content"};
 		$high = $item{"high"};
 
-		my $url = $HNS::System::MyDiaryURI."?$year$month$abc#$year$month$day$mark";
+                my $url = $HNS::System::MyDiaryURI."$year/$month/$day/$new.html#$year$month$day$mark";
 		my $rssitem;
 		$rssitem->{url} = $url;
 		$rssitem->{title} = $content;

 MS-DOS executable PE  for MS Windows (console) Intel 80386 32-bit Mono/.Net assembly

monodoc-1.1.13/engine/mod.exe: 
MS-DOS executable PE  for MS Windows (console) Intel 80386 32-bit Mono/.Net assembly

gmake[2]: Entering directory `/export/pkgsrc/personal-pkgsrc/avahi/work.livorno/avahi-0.6.20/avahi-sharp'
Makefile:598: *** multiple target patterns. Stop.

   597  @HAVE_MONODOC_TRUE@update-docs: $(ASSEMBLY)
   598  @HAVE_MONODOC_TRUE@     $(MONODOCER) -assembly:$(ASSEMBLY) -path:en

• 「これって開発版ではないの ? 2.14 まで待ってね」と言われた
• 実は PLIST を含めるのを失念していた
• 実は package を作ると、PLIST に問題がありそう

...
=> Automatic manual page handling
=> Generating post-install file lists
pkg_create: can't stat `/usr/pkg/share/gtk-doc/html/gobject/ch01.html'
pkg_create: can't stat `/usr/pkg/share/gtk-doc/html/gobject/ch02.html'
=> Registering installation for glib2-2.13.7
pkg_admin: glib2-2.13.7: File `/usr/pkg/share/gtk-doc/html/gobject/ch01.html' is in +CONTENTS but not on filesystem!
pkg_admin: glib2-2.13.7: File `/usr/pkg/share/gtk-doc/html/gobject/ch02.html' is in +CONTENTS but not on filesystem!
glib2-2.13.7 requires installed package perl-5.8.8nb4
=> Checking file-check results for glib2-2.13.7
=> Checking file permissions in glib2-2.13.7
error: /usr/pkg/share/gtk-doc/html/gobject/ch01.html: No such file or directory
error: /usr/pkg/share/gtk-doc/html/gobject/ch02.html: No such file or directory
2 errors and 0 warnings.
*** Error code 1

work.livorno/.PLIST_deps:share/gtk-doc/html/gobject/ch01.html
work.livorno/.PLIST_deps:share/gtk-doc/html/gobject/ch02.html

-include/glib/glib-2.0/glib/gregex.h
 include/glib/glib-2.0/glib/grel.h
 include/glib/glib-2.0/glib/gscanner.h
-include/glib/glib-2.0/glib/gsequence.h

${_DEPENDS_PLIST}: ${PLIST}
        ${RUN} { \
        ${AWK} '$$1 == "full" { printf "@blddep %s\n@pkgdep %s\n", $$3, $$2; }' < ${_RDEPENDS_FILE}; \
        ${AWK} '$$1 == "bootstrap" || $$1 == "build" { printf "@blddep %s\n", $$3; }' < ${_RDEPENDS_FILE}; \
        ${CAT} ${PLIST}; } > ${.TARGET}

echo @ set -e; { echo /usr/bin/awk '$1 == "full" { printf "@blddep %s\n@pkgdep %s\n", $3, $2; }' < /export/pkgsrc/devel/glib2/work.livorno/.rdepends; echo /usr/bin/a wk '$1 == "bootstrap" || $1 == "build" { printf "@blddep %s\n", $3; }' < /export/pkgsrc/devel/glib2/work.livorno/.rdepends; echo /bin/cat /export/pkgsrc/devel/glib2/work.livorno/.PLIST; } '>' /export/pkgsrc/devel/glib2/work.livorno/.PLIST_deps

In file included from glib-watch.h:30,
from glib-watch.c:30:
/export/pkgsrc/personal-pkgsrc/avahi/work.livorno/.buildlink/include/glib/glib-2.0/glib.h:65:25: error: glib/gregex.h: No such file or directory
/export/pkgsrc/personal-pkgsrc/avahi/work.livorno/.buildlink/include/glib/glib-2.0/glib.h:67:28: error: glib/gsequence.h: No such file or directory
gmake[2]: *** [libavahi_glib_la-glib-watch.lo] Error 1
gmake[2]: Leaving directory `/export/pkgsrc/personal-pkgsrc/avahi/work.livorno/avahi-0.6.20/avahi-glib'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/export/pkgsrc/personal-pkgsrc/avahi/work.livorno/avahi-0.6.20'

ttyp2:makoto@livorno 20:06:43/070805(...personal-pkgsrc/avahi)> \
ls /usr/pkg/include/glib/glib-2.0/glib/ |wc
      56      56     562
ttyp2:makoto@livorno 20:06:57/070805(...personal-pkgsrc/avahi)> \
ls -l work.livorno/.buildlink/include/glib/glib-2.0/glib |wc
      55     596    5680

＠ 「実は、やりすぎ」の件:

間もなく、作ったよ、というお知らせをいただいたので、上記、libdaemon を更新。
続いて、 goocanvas-0.4 を作って commit した。すぐに親切に教えてくれる人がいて、 少し修正。 ところが、 見ていた画面 の上の方に、「ここは古いよ」と書いてあるのに気が付かず obache 先生に sf.net の方 に新しいものがあるよと言われて 0.8 に更新。
pkglint に一点言われるが良く分らないので、ごめんなさいで commit した。

ttyr6:makoto@bologna 7:10:59/070803(...wip/goocanvas)> pkglint
WARN: buildlink3.mk:20: The file should end here.
0 errors and 1 warnings found.

＠ cvs import と cvs add:

   104  7:53    cd hns-perl/
   105  7:53    cvs update
   ...
   124  8:00    sh hns-setup.ja

ttype:makoto@bologna 8:12:05/070803(~/cvs-work/hns-perl)> 
ls -ld public_html/diary
drwxr-xr-x  10 makoto  users  1024 Aug  3 07:53 public_html/diary/

(20070807 追記)
結局、次のようなことが必要だった。

139  10:12   sudo chown -R makoto ~/diary/log ~/diary/data ~/diary/cache
140  10:12   sh -xv hns-setup.ja
143  10:13   sudo chown -R www    ~/diary/log ~/diary/data ~/diary/cache
144  10:14   pushd ~/public_html/diary
148  10:15   mv config.ph config.ph-new
149  10:15   cp config.ph-old config.ph

~/diary/log ~/diary/data ~/diary/cache

＠ .htaccess が更新されて:

configure: error: No JIT or interpreter support available or selected.
*** Error code 1

pkgsrc/lang/mono on i386:

sys-mman.c: In function 'Mono_Posix_Syscall_mremap':
sys-mman.c:100: warning: passing argument 3 of 'mremap' makes pointer from integer without a cast
sys-mman.c:100: error: too few arguments to function 'mremap'
sys-mman.c: In function 'Mono_Posix_Syscall_mincore':
sys-mman.c:109: warning: implicit declaration of function 'mincore'
sys-mman.c:109: warning: nested extern declaration of 'mincore'
gmake[2]: *** [sys-mman.lo] Error 1
gmake[2]: Leaving directory `/export/pkgsrc/lang/mono/work.livorno/mono-1.1.13.8.1/support'

 86 #ifdef HAVE_MREMAP
 87 void*
 88 Mono_Posix_Syscall_mremap (void *old_address, mph_size_t old_size,
 89                 mph_size_t new_size, guint64 flags)
 90 {
 91         guint64 _flags;
 92 
 93         mph_return_val_if_size_t_overflow (old_size, MAP_FAILED);
 94         mph_return_val_if_size_t_overflow (new_size, MAP_FAILED);
 95 
 96         if (Mono_Posix_FromMremapFlags (flags, &_flags) == -1)
 97                 return MAP_FAILED;
 98 
 99         return mremap (old_address, (size_t) old_size, (size_t) new_size,
100                         (unsigned long) _flags);
101 }       
102 #endif /* def HAVE_MREMAP */

     void *
     mremap(void *oldp, size_t oldsize, void *newp, size_t newsize,
         int flags);

patch-ac Makefile	discussion (sysconfig/libgda-3.0)

＠ database/libgda-postgres:

＠ avahi-glib requires QtCore:

char    f_fstypename[_VFS_NAMELEN]; /* fs type name */

＠ devel/glibmm:

../../glib/glibmm/regex.h:31:25: error: glib/gregex.h: No such file or directory

＠ glom の現状:

checking for GLOM... configure: error: Package requirements
bakery-2.4 >= 2.3.18 
gtkmm-2.4 >= 2.10 
gthread-2.0
gnome-vfsmm-2.6 >= 2.11.1 
libxslt >= 1.1.10 
pygda-3.0
pygtk-2.0 >= 2.6.0 
libgnome-2.0 >= 2.6.0 
iso-codes
libgdamm-3.0 >= 2.9.6
libgtksourceviewmm-1.0 
libxml++-2.6 >= 2.18.1 
libgda-3.0 >= 3.0.1 
libgda-postgres-3.0 
avahi-glib
goocanvas

No package 'pygda-3.0' found	
No package 'libgdamm-3.0' found
No package 'avahi-glib' found   

avahi-glib	.. waiting QtCore to make
libgdamm-3.0	.. waiting glibmm-2.4 >= 2.12.8 to build 
                .. looking for glib/gregex.h ( in glib-2.13.7, need patch update)
pygda-3.0	.. Is it in py24-gnome2-extras-2.14.2nb1 ?